1 3

Drivetrain Cleaner 5L Refill

Drivetrain Cleaner 5L Refill

£36.99
£36.99
Sale Sold out
Tax included. Shipping calculated at checkout.

No corrosion. No grinding chain. Just grease and grime gone.
Spray it on, scrub it in, rinse it off, Drivetrain Cleaner strips oil and old lube fast without eating away at your chain, seals or plastics. 

Show More >
View full details

Description

//

Your chain takes the worst of it every ride.

Mud, old lube and grinding grit build up fast and a filthy drivetrain doesn't just look bad, it wears out quicker and robs you of smooth power delivery. Motoverde Drivetrain Cleaner is built to cut through all of that without attacking the metal, rubber or seals underneath.

How it works:
Spray it straight onto the chain, work it into the links with a brush, let it sit for 5–10 minutes, then rinse off with water. Wipe dry and re-lube. Works on engine cases too, same process, just leave it to soak.

Why riders keep it in the garage:

- Cuts oil, grease and ingrained grime fast

- Safe on aluminium, plastic, rubber and seals — no oxidation, no damage

- Salt-free, solvent-free formula that won't corrode bolts or bare metal

- Works on chains, drivetrain components and engine cases alike

Clean chain, smoother ride, less wear over time. Get it done in one pass, re-lube, and you're set for the next ride.

FAQs

//

Will this corrode my chain or bolts?
No, it's salt-free and solvent-free, so it won't oxidise or damage aluminium, plastic, rubber or seals like harsher cleaners can.

How long do I leave it on before rinsing?
5–10 minutes is enough for it to fully penetrate and break down grease and grime.

Can I use it on engine cases, not just the chain?
Yes, spray it on, leave it to soak for around 5 minutes, agitate with a brush, then rinse off.

Do I need a chain brush, or can I use a normal brush?
A fine brush works best to get between the links, but any soft-bristle brush will do the job.

Can I use it in a chain cleaning device?
Yes, it's suitable for use through a drivetrain machine as well as direct spray application.

Do I need to re-lube after cleaning?
Yes, once the chain is wiped dry, re-lube it before your next ride to keep it protected.

How To Use

//

1. Refill 1L Drivetrain Cleaner bottle
2. Once cleaned with Motoverde Bike Wash, spray Drivetrain Cleaner directly over the drivetrain.
3. Use a fine brush to agitate between the chain links and drivetrain for a deep and thorough clean.
4. Allow the product to penetrate for 5-10 minutes and then rinse off with Motoverde Bike Wash.
5. Rub with a dry cloth, ensuring surface is clean and dry, then re-lubricate.

Can also be used through a Drivetrain Machine.
For engines: ensure the surface is clean with Motoverde Bike Wash, simply spray on Drivetrain Cleaner, leave for 5 minutes to soak, agitate with a brush, and rinse off.

Product Information

//

Danger: Causes skin irritation. Causes serious eye damage. Wash hands thoroughly after handling. Wear protective gloves/eye and face protection. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison centre/doctor.

Ingredients: Alcohols. <10% C9-11, Ethoxylated (3-6EO): <5% Amides, C8-18 (Even Numbered) and (Unsatd.), N,n-bis (Hydroxyethyl).

Keep out of reach of children. Store in a cool, dry place away from direct sunlight.

  • Safety Symbol