Pomiń, aby przejść do informacji o produkcie
1 z 3

Środek czyszczący do filtrów powietrza 5L Wkład

Środek czyszczący do filtrów powietrza 5L Wkład

Cena regularna £36.99
Cena regularna Cena sprzedaży £36.99
Sprzedaż Wyprzedane
Z wliczonym podatkiem. Koszt wysyłki obliczony przy realizacji zakupu.

Potrzebujesz środka czyszczącego filtry, który nie wydziela zapachu i jest przyjazny dla filtrów powietrza?

Nasza formuła bez metanolu jest skuteczna w czyszczeniu olejów, ale delikatna dla filtrów piankowych!

Show More >
Pokaż kompletne dane

Zwijana treść

Description

//

Your filter takes more abuse than anything else on the bike.
Every ride packs it with dirt, dust and old oil, and a clogged filter chokes your engine before you even notice it's happening. Motoverde Air Filter Cleaner is built to strip all of that out fast, without breaking down the foam or glue that holds your filter together.

How it works:Spray it on, massage it into the foam, rinse with hot or cold water till the suds are gone. That's it. Soaking works too if you'd rather submerge and rinse.

Why riders keep it in the garage:- Cuts oil and grime fast, no scrubbing marathon
- Foam-safe formula, won't crumble the filter or weaken the glue
- Methanol-free, biodegradable, no harsh chemical smell
- Works with hot or cold water, indoors or at the track

Clean filter, better airflow, more protection for your engine. Get it done in one pass, (repeat if needed) re-oil, and you're ready for the next ride.

FAQs

//

Will this damage my foam filter or the glue?No, it's built specifically to be tough on oil and dirt but gentle on foam and glue, so your filter stays intact ride after ride.

Does it work with hot or cold water?Both. Spray on, massage it in, rinse with whichever you've got.

Is it safe to use indoors?Yes. It's odourless and methanol-free, so you won't be gassing out your garage or shed.

Can I soak my filter instead of spraying it?Yes, submerge the filter, let it work, then rinse thoroughly before hanging it out to dry.

How much do I need per clean?Enough to fully coat and saturate the filter, a light, even spray covering both sides, then work it in.
Do I need to re-oil after cleaning?Yes, once the filter is fully dry, re-oil it before fitting it back to the bike.

How To Use

//

1. Remove air filter and shake off excess dirt and dust before applying Air Filter Cleaner.
2. Apply evenly, covering the filter and agitate by hand massaging the cleaner into the filter.
3. Rinse off using hot or cold water until foam disappears.
4. Repeat process if required.
5. Once the filter has been completely cleaned & degreased, hang out to dry.
6. Once dry, re-oil filter and re-use!

Product Information

//

DANGER– Causes skin irritation. Causes serious eye damage. Wash hands thoroughly after handling. Wear protective gloves/eye and face protection. IF ON SKIN: Wash with plenty of water.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison centre/doctor.

Ingredients: Alcohols. <10% C9-11, Ethoxylated (3-6EO): <5% Amides, C8-18 (Even Numbered) and (Unsatd.), N,n-bis (Hydroxyethyl).

Keep out of reach of children. Store in a cool, dry place away from direct sunlight.

  • Safety Symbol