Gå vidare till produktinformation
1 av 3

Cykeltvätt Klar att använda 1L

Cykeltvätt Klar att använda 1L

Ordinarie pris £9.99
Ordinarie pris Försäljningspris £9.99
Rea Slutsåld
Skatt ingår. Frakt beräknas i kassan.

Cykelrengöraren gjord för alla landsvägs- + terrängcyklar. Idealisk för användning på dirtbikes, motorcyklar, äventyrscyklar, mountainbikes + landsvägscyklar.

Show More >
Visa alla uppgifter

Innehåll som kan döljas

Description

//

Fresh off the track, your bike looks like it fought the trail and lost.

That's exactly what Bike Wash is for. Spray it straight from the bottle, no mixing, no measuring. The high-foaming formula clings to every panel, wheel and crevice, pulling mud and clay stains loose so you're not scrubbing for half an hour.

What makes it different:
Most bike cleaners are either weak enough to be safe or strong enough to actually work.. rarely both. Our Bike Wash is non-corrosive, so it won't eat into aluminium, carbon fibre or anodised parts, but it still lifts ingrained dirt on contact. Leave it to soak 15 minutes for a proper deep clean, or 5 minutes with a quick scrub if you're in a hurry.

Perks of our Bike Wash:

  • Ready to use, straight out the bottle - attach the trigger and go
  • High-foaming formula, clings to mud and grime instead of running straight off
  • Safe on paint, plastics, anodised parts and sensitive metals
  • UV protection to stop your paintwork fading
  • Doubles up for kit, boots and helmets

FAQs

//

Will this strip or dull my paintwork?
No, it's non-corrosive and includes UV protection, so it cleans without fading or damaging paint over time.

Is it safe on carbon fibre or anodised parts?
Yes, it's formulated to be safe on sensitive surfaces including aluminium, carbon fibre and anodised finishes.

How long should I leave it on before rinsing?
15 minutes gives the deepest clean. If you're short on time, 5 minutes with a light scrub does the job. Don't worry if it stays on longer, our Bike Wash is safe for a good soak.

Can I use it on my helmet or riding kit, not just the bike?
Yes! It's gentle enough for boots, kit and helmets as well as the bike itself.

Does it need diluting?
No, this is the ready-to-use version, straight from the bottle, no mixing required. (If you'd rather dilute and stretch your money further, the concentrate refill is the one to go for.)

Will it damage rubber seals or plastics?
No, it's safe across paint, plastic, rubber and anodised parts, no acids or harsh alkaline salts in the formula.

How To Use

//

1. Rinse excess dirt off bike.
2. Product is ready to use. Simply attach trigger and spray away!
3. Rinse excess dirt off the bike then apply Motoverde Bike Wash. For best results leave to soak for 15 minutes, for a quicker clean leave on for 5 minutes and agitate with a soft brush.
4. Rinse off with water.

Product Information

//

Ingredients: Regulation (EC) No. 648/2004: <5% Amphoteric, Anionic & Non-Ionic surfactants. Benzisothiazoline.

Keep out of reach of children. Store in a cool, dry place away from direct sunlight.